
Parts


Dexter 12in 6K RH Elec Nvr-Adj Drum Brake 23-459
Dexter 12" x 2" Right Hand electric complete brake assembly. Nev-R-Adjust. 6,000lb capacity per pair. Mounts with 5 bolts (not included). Brakes automatically adjust to deliver optimum performance and braking power. Reduce stopping distances 50 percent more than other brakes. Save time and money. Proper adjustment leads to better brake efficiency. Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 6,000lb axle with a 5 bolt pattern on the mounting flange - Right Hand(passenger's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide - Nev-R-Adjust(self-adjusting) To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Dexter 12in 6K LH Elec Nvr-Adj Drum Brake 23-458
Dexter 12" x 2" Left Hand electric complete brake assembly. Nev-R-Adjust. 6,000lb capacity per pair. Mounts with 5 bolts (not included). Brakes automatically adjust to deliver optimum performance and braking power. Reduce stopping distances 50 percent more than other brakes. Save time and money. Proper adjustment leads to better brake efficiency. Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 6,000lb axle with a 5 bolt pattern on the mounting flange. - Left Hand(driver's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide - Nev-R-Adjust(self-adjusting) To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Dexter 12in 6K LH Elec Drum Brake 23-105
Dexter 12" x 2" Left Hand electric complete brake assembly. Features: 6000lb capacity per pair. Mounts with 5 bolts (not included). Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 6000lb axle with a 5 bolt pattern on the mounting flange. - Left Hand(driver's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Dexter 12in 6K RH Elec Drum Brake 23-106
Dexter 12" x 2" Right Hand electric complete brake assembly. 6000lb capacity per pair. Mounts with 5 bolts (not included). Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 6000lb axle with a 5 bolt pattern on the mounting flange. - Right Hand(passenger's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Dexter 12in 7K RH Elec Drum Brake 23-181
Dexter 12" x 2" Right Hand electric complete brake assembly. 7000lb capacity per pair. Mounts with 5 bolts (not included). Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 7000lb axle with a 5 bolt pattern on the mounting flange. - Right Hand(passenger's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Dexter 12in 7K LH Elec Drum Brake 23-180
Dexter 12" x 2" Left Hand electric complete brake assembly. 7000lb capacity per pair. Mounts with 5 bolts (not included). Uses 12" Hub/Drums. Nuts-38N, bolts-7-5, and washers-38LW sold separately. - Fits standard 7000lb axle with a 5 bolt pattern on the mounting flange. - Left Hand(driver's side) - Complete assembly ready to bolt on and wire - For use with 12" inside diameter drum - The shoes are 2" wide To determine the size of the brake, you need 2 measurements. The first is the diameter of the brake(D). The second is the width of the shoe(W). It is good to take note of how many mounting bolts the brake has.

Replacement Bearing 14125A
Works with 14276 race. High-quality, tapered roller bearing is designed for high-speed use. Replacement race and bearing numbers are universal. - Inner diameter: 1.250" - Matching race 14276 (sold separately) This is an outer bearing for 5.2k-7k 8 lug hubs (#42 spindle) 42865, HD42866

Shackle/Spring Eye Bolts w/Nuts 9/16" x 3" - INSTALLATION AVAILABLE
Suspension bolt attaches leaf spring to the hangers or equalizers. - 9/16" bolt holes - 3" long - Used with 1-3/4" wide springs - 9/16" locknuts included - Qty. Bulk / Sold Individually

Electric Trailer Brake Assembly - 10" - Right Hand - 3500 lbs
Passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels. Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gear allows for a more precise setting No break-in period needed following initial adjustment E-coated backing plate resists wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes Brake mounting bolts are included Nuts and lock washers sold separately QAI and CSA certified Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: right hand (passenger's side) Dimensions: 10" diameter x 2-1/4" thick Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty

Electric Trailer Brake Assembly 10" Right Hand For 3500 lbs Axles - INSTALLATION AVAILABLE
Passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels. Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gear allows for a more precise setting No break-in period needed following initial adjustment E-coated backing plate resists wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes Brake mounting bolts are included Nuts and lock washers sold separately QAI and CSA certified Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: right hand (passenger's side) Dimensions: 10" diameter x 2-1/4" thick Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty

Door Holdback 6" - INSTALLATION AVAILABLE
This 6 Inch Gray Trailer Door Hold Back is a replacement part for cargo trailers made by manufacturers such as MTI and RC Trailers. It has ball ends on both sides of the stem.

Door Holdback 10" - INSTALLATION AVAILABLE
This 10 Inch Gray Trailer Door Hold Back is a replacement part for cargo trailers made by manufacturers such as MTI and RC Trailers. It has ball ends on both sides of the stem.

Flush Lock Assembly - INSTALLATION AVAILABLE

Replacement Race 25520
Works with 25580 bearing. Replacement race and bearing numbers are universal. - Outer diameter: 3.265" - Matching bearing 25580 (sold separately) Fits the 8-201-5, 8-213-5, H42655, HD42656, 42865, HD42866, H81745BX, H84305BX, and H82883BX hubs.
Get a Quote
Please enter your contact information and one of our representatives will get back to you with more information.
The item "" has been added to your shopping cart successfully!